We human beings live on the solid outer layer called the crust. Scientists who study Earth and its composition will tell you that Earth is made up of three main layers. But what's really under your feet? If you were to dig straight down, what would you find? And how far could you dig? Could you really dig a hole to China? The JAX Iron, Steel and Nickel Blackener will NOT affect stainless steel.What's under your feet? Depending upon where you're currently standing, it could be dirt, rock, or grass. It is always advisable to test JAX Iron, Steel and Nickel Blackener in a small inconspicuous area to make sure that it does not adversely affect or damage the surface being treated. Do not mix JAX Products with any other chemicals. Make sure to refer to the Safety Data Sheets for additional information before you begin. When you dispose of used products and containers, please do so in at an approved waste disposal facility. Contaminating the original container will seriously reduce the shelf-life of the product.Īlways use JAX Products in plastic or glass containers. Always store JAX products at room temperature, in tightly closed original containers AND in a locked, safe place. JAX products never expire, however, they can deteriorate over time if not cared for properly. Once you are happy with your finish, you may wax, oil, or lacquer the metal as a final step, although in many cases leaving the metal ?unprotected? may be desirable. If you seek to duplicate a particular finish, over-darken the metal and then ?relieve? it with steel wool or a polishing cloth, as above. If you remove too much of the Iron, Steel and Nickel Blackener finish, you may reapply the JAX Iron, Steel and Nickel Blackener and start over. Once you have applied the JAX product to your satisfaction, rinse the metal well with fresh, clean water and dry.Īt this point, you may use steel wool, a polishing cloth, or Scotch-Brite to achieve your desired finish. If you are applying the JAX with a brush or sponge do NOT dilute the solution. If you are going to dip your metal into JAX Iron, Steel and Nickel Blackener, you may want to dilute the JAX with water this will slow the reaction down and allow you to have more control over the finish (there is no magic dilution ratio ? a little experimentation will allow you to arrive at the optimum ratio for your work). ![]() Practice and experience will help you find the right timing for your work. If left for too long the Iron, Steel and Nickel Blackener will rub off the metal easily. If the metal is clean, the JAX Iron, Steel and Nickel Blackener will work quickly. However, do not leave the metal in the solution, or the solution on the metal, for longer than necessary. You may also dip the entire object into the solution. Use a bristle brush, sponge or rag and apply the JAX Iron, Steel and Nickel Blackener directly to the metal. To be safe, eye protection is always recommended. Wearing gloves is highly recommended as to not introduce oils from your hands to the metal. Regardless of what you use to clean your metal, we recommend using Dawn Dishwashing Liquid as the final step before applying the JAX Iron, Steel and Nickel Blackener. Your choice of cleaner depends on what you are trying to remove from your metal. JAX manufactures metal cleaners that are optimal for prepping your metal, but there is no one cleaner that will guarantee perfection. ![]() To ensure the best results, clean your metal of all lacquer, oil, grease and wax. Wash the JAX off the metal when the metal is slightly darker than your desired finish.Apply the JAX Iron, Steel and Nickel Blackener. ![]() Prepare and clean the surface to be treated.Using JAX Iron, Steel and Nickel Blackener is simple:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |